Philips Semiconductors ISP1520
Hi-Speed USB hub controller
Product data Rev. 03 — 24 November 2004 37 of 51
9397 750 13701 © Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Table 43: Dynamic characteristics: high-speed source electrical characteristics
V
CC
= 3.0 V to3.6 V; T
amb
=
−
40
°
Cto+70
°
C; test circuit Figure 21; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Driver characteristics
tHSR rise time 10 %to 90 % 500 - - ps
tHSF fall time 90% to 10 % 500 - - ps
Clock timing
tHSDRAT data rate 479.76 - 480.24 Mbit/s
tHSFRAM microframe interval 124.9375 - 125.0625 µs
tHSRFI consecutive microframe interval
difference 1 - four high-speed
bit times ns
Table 44: Dynamic characteristics: full-speed source electrical characteristics
V
CC
= 3.0 V to3.6 V; T
amb
=
−
40
°
Cto+70
°
C; test circuit Figure 22; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Driver characteristics
tFR rise time CL= 50pF; 10 % to 90 % of
|VOH −VOL|4 - 20 ns
tFF fall time CL=50 pF; 90 % to 10 % of
|VOH −VOL|4 - 20 ns
tFRFM differential rise and fall time
matching
[1] 90 - 111.1 %
ZDRV driver output resistance for the driver that is not
high-speed capable 28 - 44 Ω
VCRS output signal crossover voltage [1][2] 1.3 - 2.0 V
Data source timing[2]
tDJ1 source differential jitter for
consecutive transitions see Figure 10 [1] −3.5 - +3.5 ns
tDJ2 source differential jitter for paired
transitions see Figure 10 [1] −4- +4ns
tFEOPT source SE0 interval of EOP see Figure 11 160 - 175 ns
tFDEOP source differential data-to-EOP
transition skew see Figure 11 −2- +5ns
Receiver timing[2]
tJR1 receiver data jitter tolerance for
consecutive transitions see Figure 12 −18.5 - +18.5 ns
tJR2 receiver data jitter tolerance for
paired transitions seeFigure 12 −9- +9ns
tFEOPR receiver SE0 width accepted as EOP; see
Figure 11 82--ns
tFST width of SE0 interval during
differential transaction rejected as EOP; seeFigure 13 --14ns
Hub timing (downstream ports configured as full-speed)[2]
tFHDD hub differential data delay (without
cable) see Figure 14; CL=0pF --44ns