LFF6020
2Enter the desired number of copies and confirm with the OK button.
3Choose the paper tray AUTOMATIC or MANUAL
with the buttons | or , then confirm with the OK |
button. |
|
Copying in ID Card mode is only possible on A4 (original document size < A5) or Letter (original
Important document size < Statement) paper size. Make sure that the selected paper tray uses the correct paper size.
4Choose the copying option ID CARD with the
buttons or and confirm with the OK button.
5Choose the resolution depending on the desired printing quality AUTO, TEXT, QUALITY TEXT or
PHOTO with the buttons or , then confirm with the OK button. For optimal results with ID documents, select the PHOTO resolution.
6 Adjust the contrast level with the buttons | or , |
then confirm with the OK button. |
|
7Adjust the desired brightness level with the buttons
or , then confirm with the OK button.
8Choose the paper type NORMAL, THICK with the
buttons or , then confirm with the OK button. The LCD screen displays the following message:
PUT ID CARD
THEN OK
9 Place your identity card or any other official document against the glass of the flatbed scanner, as shown below:
10 Press the OK button.
The document is scanned then the LCD screen displays the following message:
TURN UP DOC
THEN OK
11 Turn your document over then confirm with the OK button.
The machine prints out a copy of your document.
Special setup for the copying
Setups done through this menu become the device | Copy |
default setups after you confirm. | |
| 3 - |
When the quality of the printing is |
Important | not satisfying, you can proceed to a | |
calibration (see Calibrate your | ||
| ||
| scanner, page 24). | |
|
|
Resolution setup
The RESOLUTION parameter allows you to setup the photocopy resolution.
| 841 - ADVANCED FCT/COPY/RESOLUTION | |||||
1 | Press | , enter 841 using the keypad. |
|
|
| |
2 | Choose the resolution with the buttons |
| or | |||
| according to the following table: |
|
|
| ||
Parameter |
| Signification |
| Icon | ||
|
| |||||
|
|
|
|
|
| |
|
|
|
|
|
| |
AUTO |
| Low resolution. |
| none | ||
|
|
|
|
|
|
|
|
|
| Standard resolution for |
|
|
|
TEXT |
| documents containing text and |
|
|
| |
|
|
| graphics. |
|
|
|
|
|
|
|
|
| |
QUALITY |
| Optimal resolution for |
|
|
| |
TEXT |
| documents containing text. |
|
|
| |
|
|
|
|
|
|
|
|
|
| Optimal resolution for |
|
|
|
PHOTO |
| documents containing |
|
|
| |
|
|
| photographies. |
|
|
|
|
|
|
|
|
|
|
3Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the 
button.
Note | You can also change the resolution by | ||
pressing the | button. | ||
| |||
|
|
| |
Zoom setup
The ZOOM parameter allows you to reduce or enlarge an area of a document by choosing the origin and the zoom level to apply to the document, from 25 to 400 %.
| 842 - ADVANCED FCT/COPY/ZOOMING |
1 | Press , enter 842 using the keypad. |
2 | Enter the desired zoom level with the |
| alphanumerical keypad or choose among |
| predefined values with the buttons and . |
3Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the 
button.
- 19 -
