Philips MC165 Reviewing the program, Erasing the program, CD-playerand CD handling, Programming track numbers, CD-PLAYER, CD HANDLING, PROGRAM FULL,

CD-PLAYER		CD HANDLING

English

	G
	IN
	N
U
T

PRESET	BAND
	BAND	R
		E
		N
	TU
PROGRAM	CD
PROGRAM	OPEN/
LOCK	OPEN/
C	CLOSE

SHUFFLERDS/ TIMER AUX

•ON STANDBY

Reviewing the program

1If necessary press 9 (STOP 9 on the remote control) to stop playback.2To review your program keep PROGRAM depressed for more than 2 seconds.

➞ The display shows all stored tracks in sequence.

Note: If you try to store more than 20 tracks the display shows PROGRAM FULL.

Erasing the program

CD-player and CD handling

If the CD-player cannot read CDs correctly use a commonly available cleaning CD to clean the lens before taking the CD-player to repair. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens.

The lens may cloud over when the set is suddenly moved from cold to warm surroundings. Playing a CD is not possible then. Leave the CD-player in a warm environment until the moisture evaporates.

To take the CD out of its box

Programming track numbers

You can select up to 20 tracks and store them in the memory in a desired sequence. You can store any track more than once.

1If necessary press 9 (STOP 9 on the remote control) to stop playback.

2Select a desired track with ° or § (PREV. ¡ or NEXT ™ on the remote control).

3Press PROGRAM to store the track.

➞PROGRAM flashes and the calculated playing time of the tracks programmed is shown.

4Select and store all desired tracks in this way.5Press 2; (PLAY 2 on the remote control) to listen to your selection of tracks.

1If necessary press 9 (STOP 9 on the remote control) to stop playback.

2Press 9 (STOP 9 on the remote control) to erase the program.

➞PROGRAM CLEARED is displayed once, PROGRAM goes off and the program is erased.

Note: The program will also be erased if you–interrupt the power supply,–open the CD tray.

easily, press the centre spindle while lifting the CD. Always pick up the CD by the edge and put it back in its box after use.

To clean the CD, wipe it in a straight line from the centre toward the edge using a soft, lint- free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it.