Philips MC165 Timer activation and deactivation, Timer setting, Sleeptimer, Clock setting, CLOCK/TIMER, English, ➞\flashes, ➞\is shown, ➞\goes off, ➞cor tis shown

CLOCK/TIMER

Manual clock setting

Timer activation and deactivation

English

	G
	IN
	N
U
T

ESET
PR	BAND
		R
		E
		N
	TU
PROGRAM	CD
	N/
CLOCK	OPELOSE
	C

RDS/HUFFLE

S

ER

TIM

AUX

•ON STANDBY

RA Y

1Press CLOCK on the set.➞The clock digits 00:00 flashes.2Press 4 PRESET 3 on the set to set the hour.

3Press 11 TUNING 22 on the set to set the minutes.

4Press CLOCK on the set to confirm the settings.

Timer setting

The set can be used as an alarm clock, whereby the CD or

•Press TIMER during standby or playback.➞\is shown.•Press TIMER anytime to deactivate the timer.➞\goes off.

Sleeptimer

The sleeptimer is a set period of time before the set switches off. The clock time has to be set before the sleeptimer can be used.

Clock setting

It is possible to set the clock by using a time signal which is broadcast with RDS stations. This only works if the RDS station is sending this signal.

Automatic clock setting1Tune to a RDS station (see ”RADIO“).2Press CLOCK on the set.

➞The clock digits 00:00 flashes.

3Press RDS on the set.➞READING RDS CLOCK and the clock time is displayed.

4Press CLOCK on the set to confirm the settings.

If NO RDS CLOCK is displayed there is no time signal transmitted. In that case you have to set the clock manually.

Note: The time signal broadcasted from certain RDS stations may not always be accurate. If you find there is a discrepancy in clock time, set your clock manually (and the time will then run accurately).

tuner is switched on at a set time.

1Keep TIMER on the set depressed for more than 2 seconds.

➞\flashes.2Press 4 PRESET 3 on the set to select the desired sound source.➞cor tis shown.3Press TIMER on the set.➞The clock digits flash.

4Press 4 PRESET 3 on the set to set the desired hour.

5Press 11 TUNING 22 on the set to set the desired minute.6Press TIMER on the set to confirm the settings.

Note: A power-saving feature is built into the timer. If no key or control is adjusted during 30 minutes of timer set playback, the unit will automatically switch to standby mode.

1Press SLEEP on the remote control until the desired sleeper time is displayed.➞SLEEP, 60, 45, 30, 15, 10, OFF2As soon as the desired time is displayed, do not press the key again.➞After the chosen time has elapsed, the set switches to standby.

•To deactivate the sleeptimer, press SLEEP on the remote control until OFF is displayed.

8