15
Set clock
1 In the standby mode, pr ess and hold
CLOCK on the remote control to
activate the clock set ting mode.
24H begin to blink. »
2 Press / repeatedly to toggle
between 12H and 24H.
3 Press CLOCK to confirm.
The hour digits displays and begin to »
blink.
4 Press / to se t the hour and press
CLOCK to confirm.
The minute digits displays and begin »
to blink.
5 Press / to se t the minute and press
CLOCK to confirm.
Turn on
1 Press .
The unit switches to the last selected »
source.
4 Get started
Caution
Use of controls or adjustm ents or •
performance of proce dures other than he rein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Kee p batteries away fr om •
heat, sunshine or fir e. Never discard ba tteries
in fire.
For first-time use:
1 Remove the protective tab t o activate the
remote control battery.
2 Open the battery compartment.
3 Insert one lithium C R2025 battery w ith
correct polari ty (+/-) as indicated.
4 Close the battery co mpartment.
Note
Before you press any func tion button on t he •
remote control, fir st select the cor rect source
with the remote contr ol instead of the main
unit.
English
EN