23
• [Off] – Enjoy sur round sound with a full
dynamic range.
Note
Applicable only to Dol by Digital encoded •
DVD.
Video setup
1 Press SYSTEM MENU.
»[General Setup] menu is displayed.
2 Press to select [Video Setup], then
press .
3 Select an option, then press OK.
4 Select a setting, t hen press OK.
To return to the previous menu , •
press .
To exit the menu, press• SYSTEM
MENU.
[TV System]
Change this setting if th e video does not
appear correctly. By default, this setting
matches the most common set ting for TVs in
your country.
• [PAL] - For PAL-system TV.
• [Multi] - For TV that is compatible w ith
both PAL and NTSC.
• [NTSC] - For NTSC-system T V.
[Analogue Output]
Select an analogue set ting based on the audio
device that is connected t hrough the analogue
audio jack.
• [LT/RT] - For surround sound output
through two speakers .
• [Stereo] - For stereo output.
• [ VS Wide] - Dolby Virtual Sp eaker
option for small space.
• [ VS Reference] - Dolby Virtual Speaker
option for spacious room.
[HDMI Audio]
Select the HDMI audi o setting when you
connect this produc t and the TV with an
HDMI cable.
• [On] - Allow audio output th rough the
TV and the speaker sys tem. If the audio
format on the disc is not suppo rted, it
will be downmixed to two- channel sound
(linear-PCM).
• [Off] - Disabl e audio output from the
TV. The sound is only outpu t through the
speaker system.
[Audio Sync]
Set the delay time for audio ou tput when you
play a video disc.
1 Press OK.
2 Press / to set the de lay time.
3 Press OK to confirm and exit.
[Sound Mode]
Selects a preset sou nd effect to enhance the
audio output.
• [3D] – Set the 3D processing outpu t
mode.
• [Movie Mode] – Select a sound effect for
movies.
[Night Mode]
Make loud sound level softer a nd soft sound
level louder so that you can watch t he DVD
movies at a low volume, witho ut disturbing
others.
• [On] – Enjoy quiet viewing at nig ht.
English
EN