5Listen to the radio

Tune to a radio station

Note

For optimal reception, fully extend and adjust the position of the FM antenna.

The unit does not support MW radio reception.

1Press TUNER to select the tuner source.

2 Press and hold / for more than 2 seconds.

»[SEARCH] (search) is displayed.

»The radio tunes to a station with strong reception automatically.

3Repeat step 2 to tune to more stations.

To tune to a weak station, press / repeatedly until you fi nd optimal reception.

Program radio stations manually

Note

You can program a maximum of 40 preset radio stations.

1Tune to a radio station.

2Press PROG/ANGLE to activate program mode.

»[PROG] (program) blinks on the display.

3Press / to allocate a number (1 to 40) to this radio station, then press PROG/ ANGLE to confi rm.

»The preset number and the frequency of the preset station are displayed.

4Repeat the above steps to program other stations.

Note

To overwrite a programmed station, store another station in its place.

Program radio stations automatically

Note

You can program a maximum of 40 preset radio stations.

1 In tuner mode, press and hold PROG/

ANGLE for 2 seconds to activate automatic program mode.

»[AUTO] (auto) is displayed.

»All available stations are programmed in the order of waveband reception strength.

»The fi rst programmed radio station is broadcast automatically.

Select a preset radio station

1In tuner mode, press / to select a preset number.

18EN

Page 17
Image 17
Philips MCD355 user manual Listen to the radio, Tune to a radio station, Program radio stations manually