Select audio downmix
Select a suitable audio downmix when you are playing a DVD recorded in Dolby Digital format.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > the [DOWNMIX] (downmix), and then press 
.
3Select an option and then press OK.
•[LT/RT]
Select this if the unit is connected to a Dolby Pro Logic or Dolby Pro Logic II decoder.
•[STEREO] (stereo)
Select this when output delivers sound from only the two front speakers.
•[VSS]
Allows the DVD player to use virtual surround sound effects.
4Press SYSTEM MENU to exit.
Select reverb mode
3D processing provides a virtual surround sound experience using just two speakers.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [3D PROCESSING] (3d processing), and then press 
.
3Select an option and then press OK.
•[OFF] (off), [CONCERT] (concert), [CHURCH] (church), [PASSIVE] (passive), [WIDE] (wide), or [LIVE] (live)
4Press SYSTEM MENU to exit.
Select sampling rate
You can select the Linear Pulse Code Modulation (LPCM) output sampling rate. The higher the sampling rate, the better the sound quality.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [LPCM], and then press 
.
3Select an option and then press OK.
•[48K]
For discs recorded at sampling rate of 48kHz.
•[96K]
For discs recorded at sampling rate of 96 kHz.
•[192K]
For discs recorded at sampling rate of 192 kHz.
4Press SYSTEM MENU to exit.
Enable night mode
[NIGHT MODE]
Makes loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
1Press SYSTEM MENU.
2Select [AUDIO SETUP] (audio setup) > [NIGHT MODE] (night mode), and then press 
.
3Select an option and then press OK.
•[ON] (on)
Enjoy quiet viewing at night.
•[OFF] (off)
Enjoy surround sound with its full dynamic range.
4Press SYSTEM MENU to exit.
English
EN 23
