Philips MCD355 user manual Troubleshooting

Models: MCD355

1 30
Download 30 pages 43.6 Kb
Page 26
Image 26

10 Troubleshooting

Caution

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/support).When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.

No power

Ensure that the AC cord of the apparatus is connected properly.

Ensure that there is power at the AC outlet.

As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated.

No disc detected

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc.

Use a fi nalized CD or correct format disc.

No picture

Check the video connection.

Turn on the TV to the correct Video-In channel.

Black and white or distorted picture

The disc does not match the TV color system standard (PAL/NTSC).

Sometimes a slight picture distortion may appear. This is not a malfunction.

Clean the disc.

The aspect ratio of the TV screen cannot be changed even though you have set the TV display format.

The aspect ratio if fi xed on the loaded DVD disc.

The aspect ratio may not be changed for some TV systems.

No sound or poor sound

Adjust the volume.

Disconnect the headphone.

Remote control does not work

Before pressing any function button, fi rst select the correct source with the remote control instead of the main unit.

Reduce the distance between the remote control and the apparatus.

Insert the battery with its polarities (+/– signs) aligned as indicated.

Replace the battery.

Aim the remote control directly at the sensor on the front of the apparatus.

Disc does not play

Insert a readable disc with the label side facing you.

Check the disc type, color system and regional code. Check for any scratches or smudges on the disc.

Press SYSTEM to exit the system setup menu.

Disable the password for parental control or change the rating level.

Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system again.

As a power-saving feature, the system turns off automatically 15 minutes after disc play reaches the end and no control is operated.

Poor radio reception

Increase the distance between the apparatus and your TV or VCR.

Fully extend the FM antenna.

Connect an outdoor FM antenna instead.

English

EN 27

Page 26
Image 26
Philips MCD355 user manual Troubleshooting