Alarm
Your phone has a
Set the alarm
1 Tap 
to access the main menu screen.
2 Select 
> [Alarm], then tap 
to confirm.
3 Select [On/off] > [On], then tap 
to confirm.
4 Select [Alarm time], then tap 
to confirm.
5 Tap 
/ 
once or several times to enter an alarm time, then tap 
to confirm.
6 Select [Repetition], then tap 
to confirm.
7 Select an alarm occurrence, then tap 
to confirm.
8 Select [Alarm tone], then tap 
.
9 Select a tone from options, then tap 
to confirm.
»»The alarm is set and 
is displayed on the screen.
Tip
•• Tap 
/ 
to switch between [AM]/[PM] .
Note
•• The alarm clock rings at the preset time every day until it is set to [Off].
Turn off the alarm
When the alarm rings
Press any key to turn off the alarm.
Before the alarm rings
1 Tap 
to access the main menu screen.
2 Select 
> [Alarm] > tap 
to confirm.
3 Select [On/off] > [Off], then tap 
to confirm.
»»The setting is saved.
Services
Call list type
You can set if you can see all calls or missed calls from the call log.
Set the call list type 1 Tap 
2 Select 
> [Services] > [Call list type], then tap 
to confirm.
3 Select an option, then tap 
to confirm.
ECO mode
The handsfree phone supports Eco mode to | ||
minimize transmission power and radiation. | ||
1 | Tap | to access the main menu screen. |
2 | Select | >[Services]> [Eco mode], then |
| tap | to confirm. |
You can choose between two modes:
•[Off]: No reduction of transmission power.
•[On]:
•In Eco mode, transmission will be reduced to minimize radiation. For selected Philips models (CD48x, CD49x, CD68x, CD69x and SE888), both the handset and DECT base will reduce transmission power drastically when the handset is close to the base.
The transmission power increases automatically only when the handset is further away from the base. Make sure that Eco mode is also enabled for these models when selecting Eco mode on your handsfree phone. In this mode, the range will be reduced by approximately 50%.
•If you register your handsfree phone with another phone base not listed above, the handsfree phone will reduce transmission power automatically when it is close to the base.The DECT base
EN 19
