Note
•• During normal use, it is not necessary to switch off the phone at any time. Switch the phone off only during extended period of
Configure your phone (country dependent)
When using your phone for the first time it will prompt you for initial setup information.
Set the country/language
Select your country/language, then tap 
to confirm.
»»The country/language setting is saved.
Note
•• The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country.Then you can set the date and time.
•• You can
Register your phone
Your phone automatically asks you to register the phone with your original cordless phone's base station when you turn it on for the first time. If you skipped this step, refer to steps
1 Tap 
2 Select 
tap 
3 Press the paging button on your original cordless phone's base station for approximately 10 seconds to set the base station of your phone to registration mode.
Note
•• Check in the user manual of your base station on how to enter the registration mode. For most base stations, this can be achieved by pressing the paging button for
•• The phone tries to connect to the base station with a series of standard passcodes automatically.
•• A successful registration is indicated by a sound signal in less than 30 seconds.
•• If your base station uses the passcodes/PIN different from the most common settings (e.g. 3456), you have to enter this PIN/passcode manually by following steps 4 to 6.
•• If you use a pin code with more than 4 digits, it cannot be entered through the handsfree phone. In this case, change your base stations pin code to a
4 If your base station's passcode/PIN is not
5 Select 
to make corrections.
6 Tap 
to confirm the passcodes/PIN.
»»When you see a confirmation message, registration is complete.
EN 7
