SURROUND SOUND
About surround sound

 

 

 

Switching surround sound

 

 

 

English

Surround sound gives you a completely new listening sensation. You will have the feeling of being in the middle of the action, because sound is coming from everywhere around you. Look out for TV broadcasts, audio and video tapes and

discs with the 3, 1or marks which are encoded for multichannel surround sound. You should prefer Dolby Digital or DTS to get the most out of your receiver.

The FR 975 is able to reproduce DTS surround sound. DTS is a premium multichannel surround sound system available on DVD discs, laserdiscs and audio discs. Consult your software dealer on the availability of DTS software in your region.

Notice that DVD discs do not always carry full multichannel surround. To be sure that a disc is multichannel encoded consult your dealer.

Most ordinary stereo tapes and discs can be replayed using surround sound settings with good results. If the reproduction is distorted in surround mode, switch to normal stereo mode.

The availabilty of the various surround sound modes described depends on the number of speakers used and the incoming sound information.

With surround sound on, you can switch through the different surround modes. Note that the possibilities are related to speaker setup defined in the receivers menu.

If a digital surround signal is detected, the receiver will scroll either DOLBY DIGITAL or DTS.

1Press SURROUND ON/OFF to switch on the surround sound. yThe surround mode in use is scrolled.

2Press SURR. MODE repeatedly to listen to the different surround modes (if available).

yThe chosen mode and the speakers used are displayed. If the incoming multichannel signals are reduced to fewer output signals, DOWNMIX is displayed.

FR 965, FR 968 only:

3Press 3D SURROUND to switch on or off virtual 3D surround. yA light indicates if virtual 3D surround is on.

FR 975 only:

3Press VIRTUAL MODE as often as necessary to switch through the virtual surround sound modes:

1 ⋅ to activate 3D SURROUND

2 ⋅ to activate MULTI FRONT

3 ⋅ to activate MULTI REAR

4 ⋅ to activate NATURAL SURROUND

yA light indicates if a virtual surround sound mode is on.

-signs indicate which virtual surround sound mode is active.

4Press SURROUND ON/OFF to switch off the surround sound.

ySURROUND OFF is scrolled.

22