Philips MX6050D/17B Connecting TV, Using Composite Video jack, Set the P-SCANswitch to ‘OFF.’

Connections

E n g l i s h

Step 4: Connecting TV

Option 1 Option 2

1

OOFER

OOFER

2 3 2 3 1

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV.

–Connect the DVD system directly to the TV.

Using Composite Video jack

1Use the supplied composite video cable (yellow) to connect the DVD system’s VIDEO OUT jack to the video input jack (or labeled as A/V In, CVBS, Composite or Baseband) on the TV.

2To hear the TV channels through this DVD system, use the supplied audio cables (white/red) to connect AUDIO IN-TVjacks to the corresponding AUDIO OUT jacks on the TV.

3 Set the P-SCANswitch to ‘OFF.’

IMPORTANT!

The progressive scan video quality is only possible when using Pr/Cr Pb/CbY, and a progressive scanTV is required.

Using Component Video jacks (Pr/Cr Pb /Cb Y)

1Use a component video cables (red/blue/ green - not supplied) to connect the DVD system’s Pr/Cr Pb/Cb Y jacks to the corresponding Component video input jacks (or labeled as Pr Pb Y or YUV) on the TV.

2To hear the TV channels through this DVD system, use the supplied audio cables (white/red) to connect AUDIO IN-TVjacks to the corresponding AUDIO OUT jacks on the TV.

3If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), set the P-SCANswitch to ‘ON’. Otherwise, set it to ‘OFF.’

Helpful Hint:

– You have to power off the DVD system or switch to standby mode before changing the P-SCAN switch setting.

12