Radio Reception

English

D 7

Tuning to radio stations

1Press SOURCE on the set (or FM on the remote control ) repeatedly until FM is displayed.

2Press down on TUNING à / á (or à / á on the remote control) and release the button. The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.

3Repeat step 2 if necessary until you find the desired station.

To tune to a weak station, press TUNING à / á (or à / á on the remote control) briefly and repeatedly until you have found optimal reception.

Programming radio stations

You can store up to a total of 20 FM radio stations in the memory.

Manual programming

1Tune to your desired station (see Tuning to radio stations).

2Press PROG on the remote control to activate programming.

PROG flashes in the display.

3Press í/ ë to allocate a number from 1 to 20 to this station.

4Press PROG on the remote control again to confirm the setting.

PROG disappears.The preset number and the frequency of the preset station are shown.

5Repeat the above four steps to store other stations.

You can override a preset station by storing another frequency in its place.

Tuning to preset radio stations

Press í/ ë until the desired preset station is displayed.

Automatic programming

Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.

In tuner mode, press and hold PROG until “AUTO” appears on the display panel.

All previously stored radio stations will be replaced.

32

Page 32
Image 32
Philips PDCC-ZYL-0839 manual Radio Reception, Tuning to radio stations, Programming radio stations