Radio Reception
English
D 7
Tuning to radio stations
1Press SOURCE on the set (or FM on the remote control ) repeatedly until FM is displayed.
2Press down on TUNING à / á (or à / á on the remote control) and release the button. ➜ The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING à / á (or à / á on the remote control) briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only programme stations which are not in the memory already.
1Press í/ ë to select the preset number where programming should start.
Note:
–If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2Press PROG on the remote control for more than 2 seconds to activate programming.
➜AUTO is displayed and available stations are programmed in order of waveband reception strength.The first preset automatically stored will then be played.
Manual programming
1Tune to your desired station (see Tuning to radio stations).
2Press PROG on the remote control to activate programming.
➜ PROG flashes in the display.
3Press í/ ë to allocate a number from 1 to 20 to this station.
4Press PROG on the remote control again to confirm the setting.
➜ PROG disappears, the preset number and the frequency of the preset station are shown.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Tuning to preset radio stations
●Press í/ ë until the desired preset station is displayed.
32