English

Troubleshooting

Problem

Solution

The micro DVD player does not start

Insert a readable disc with the playback side

playback.

facing down.

 

Check the disc type, colour system and regional

 

code. Check for any scratches or smudges on

 

the disc.

 

Press SYSTEM MENU to turn off the setup

 

menu screen.

 

Cancel the parental control rating function or

 

change the rating level.

 

Moisture has condensed inside the system.

 

Remove the disc and leave the system turned on

 

for about an hour.

The DVD micro system does not respond when the buttons are pressed.

Cannot activate some features, such as Subtitles, or multi-language Audio.

Disconnect the power plug from the outlet and insert again.

Multi-language sound or subtitle is not recorded on the DVD.

Changing the language for the sound or subtitle is prohibited on the DVD.

The features may not be available on the disc.

Radio reception is poor.

If the signal is too weak, adjust the antenna or

 

connect an external antenna for better

 

reception.

 

Increase the distance between the Mini HiFi

 

System and your TV or VCR.

The timer is not working.

Set the clock correctly.

The Clock/Timer setting is erased.

Power has been interrupted or the power cord

 

has been disconnected. Reset the clock/timer.

The remote control does not function.

Select the correct source (DISC or AUX for

 

example) before pressing the function button.

 

Point the remote control at the remote sensor

 

of the unit.

 

Reduce the distance to the player.

 

Remove any possible obstacles.

 

Replace the battery with new one.

 

Check that the battery is loaded correctly.

Low hum or buzz sound.

Place the DVD micro system as far away as

 

possible from electrical devices (such as

 

speakers,TV) that may be causing interference.

Low bass response.

Check all speakers for correct polarity.

38

Page 38
Image 38
Philips PDCC-ZYL-0906 user manual Problem Solution