Device overheated, Cleaning the Lens, Danger | Philips PPX2230

Cleaning

Cleaning

DANGER!

Switching off the device!

Switch the device on or off using the power switch before removing the power supply from the socket.

DANGER!

Instructions for Cleaning!

Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning flu- ids.

Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.

Cleaning the Lens

Use a brush or lens cleaning paper for cleaning the lens of the projector.

DANGER!

Do not use any liquid cleaning agents

Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coat- ing film on the lens.

Device overheated

A overheat symbol appears if the device is overheated.

•At maximum level of brightness the symbol appears in the status bar and the device turns automatically to minimum level of brightness.

•At minimal level of brightness the symbol shows for three seconds in the middle of the screen. Then the device turns off automatically.

Service

21

Image 21

Philips PPX2230 Device overheated, Cleaning the Lens, Switching off the device, Instructions for Cleaning, Danger

Contents

Register your product and get support at Philips · PPX2230 · Table of Contents Overview Symbols UsedDear Customer Troubleshooting Setting Up the Device 1 General Safety InformationPower Supply Repairs There is a risk of explosion if the incor- rect battery type is used High Power LEDGeneral Safety Information Risk of explosion with incorrect type of batteries Top of the Device 2 OverviewSide view Bottom of the Device Overview of the Menu Functions Symbols in the Main MenuOverview Connect power supply / charge battery Setting up the DeviceInitial Installation 3 Initial Operation 4 Memory card / USB storage medium Connecting USB StorageInserting a Memory Card Medium Successful connection Connect to a computer USB Connecting to a computer Connecting using Audio5 Connect to the Playback Device Video CVBS Adaptor Cable Connecting the Headphones Video Playback 6 Media PlaybackVideo Playback USB/SD card/ internal memory File Format Modify settings during playback Photo PlaybackModify other settings Pause slideshow Managing files Music PlaybackCopy Files Switch off the image playback Error Delete FilesMark the entire folder Files already exist Deleting photos on the memory card When deleting photos via the computer, note that the photos may not be correctly dis- played when the memory card is inserted into the digital camera again. Digital cameras sometimes store additional information in specific folders, including previews and orien- tation information Image settings 7 SettingsSound Settings Video settings Reset settings-Reset settings to factory defaults MaintenanceFirmware Update-Update Firmware Connect for the duration of the firmware update the power adapter Care Instructions for the Battery 8 ServiceBattery deep discharge Do not replace the battery yourself Cleaning the Lens CleaningDevice overheated Switching off the device Power Cycling TroubleshootingProblems Solutions Technical Data 9 AppendixAppendix At sales points in the event of the purchase of similar equipment PPX2230 · UK 253461900-C Sagemcom Documents SAS