Installing or Changing the Batteries of the Remote Control
DANGER!
Risk of explosion with incorrect type of batteries
Only use the CR 2025 type battery.
There is a risk of explosion if the incor- rect battery type is used.
1To access the battery, disengage the locking mecha-
nism ( 
) and slide out the battery compartment ( 
).
2Insert the new batteries into the battery compart- ment with the positive and negative poles as shown on the back of the remote control. Make sure the polarities(+ and
3Push the battery compartment back into the remote control until the locking mechanism engages.
Note
Normally the batteries will last for around one year. If the remote control stops working, please replace the batteries. If the device is not used for a long time, take out the batter- ies. This will prevent leakage and possible damage to the remote control.
The used batteries should be disposed of according to the recycling regulations of your country.
10 | Philips · PPX3407 · PPX3410 |
