Philips PPX3407 Device overheated, Cleaning the Lens, Switching off the device, Danger

Cleaning

DANGER!

Switching off the device!

Switch the device on or off using the power switch before removing the power supply from the socket.

DANGER!

Instructions for Cleaning!

Use a soft, lint-free cloth. Never use liquid or easily ￿ammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning ￿u- ids.

Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.

Cleaning the Lens

Use a brush or lens cleaning paper for cleaning the lens of the projector.

DANGER!

Do not use any liquid cleaning agents

Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coat- ing ￿lm on the lens.

Device overheated

A overheat symbol appears if the device is overheated. At maximum level of brightness the symbol appears in the status bar and the device turns automatically to minimum level of brightness.

At minimal level of brightness the symbol shows for three seconds in the middle of the screen. Then the device turns off automatically.

24 Philips · PPX3407 · PPX3410