Philips REM400 setup guide Scan Key, MCP Key, FC1 And FC2 Keys

OPERATING YOUR REMOTE CONTROL (continued)

Deleting Functions From The L Keys:

1.	On the DSS remote control,press
	and hold SET until the red light
	blinks twice,then release SET.
2.	Enter 9 - 7 - 6.
3.	Press the component
	key once where the
	learned feature to be
	deleted is stored (e.g., TV).
4.	Press the L key to be deleted
	twice. The red light will blink
	twice after the second press.

5.To clear additional functions stored on the L keys,repeat steps 1 through 4 .

SCAN Key

The SCAN key allows the remote control to scan the TV, VCR, CBL and DSS channels. When activated, the remote control will change channels every 3 seconds.

1.	On the remote con-
	trol, press TV, VCR,
	CBL, or DSS once.
2.	Press SCAN once. Scanning will
	start with the current channel,
	then proceed to the next channel
	up, and continue until all chan-
	nels of your TV,VCR,CBL or DSS
	component are scanned.
3.	To stop scanning channels,press
	SCAN.

MCP Key

The DSS remote control includes a multi- component power (MCP) key that can be programmed for master power on/off con- trol of components using a single key.

To program the MCP key:

1. On the remote control, press and hold SET until the red light blinks twice,then release SET.

2. Enter 9-9-5. The red light will blink twice.

3. Press MCP once.

4.	Press a Component
	key once (e.g., TV,
	VCR, CBL, AUD, DSS,
	or CD).

5. Press POWER.

6.Repeat steps 4 and 5 for each component you want under master power on/off control.

7. Press and hold SET until the red light blinks twice, then release SET.

To Clear The MCP Key:

1. On the remote control,press and hold SET until the red light blinks twice, then release SET.

2. Enter 9-9-5. The red light will blink twice.

3. Press MCP once.

4. Press and hold SET until the red light blinks twice, then release SET.

FC1 And FC2 Keys

The FC1 and FC2 keys can be setup to per- form a number of functions with a single key press once the selection is programmed. Repetitive, time-consuming operations can be grouped for easy, convenient access through the press of one key.

The FC keys are ideal for home theater oper- ations, setting a favorite channel, adding to multiple component uses, guide steps or other multiple functions you would like to control with one key press. On one key, you can define and program a sequence of events.

Moreover,each FC key can hold up to 15 key presses, allowing optimal individual cus- tomization. Below are a few examples to get you started.

Programming A Favorite Channel

With so many channels available through your cable system or satellite provider, a favorite channel can be programmed for easy, direct channel selection with one key press.

For example, let’s assume your favorite pro- grams are on channel 71. Use the following instructions to program the FC1 or FC2 key for this channel:

continued on next page...

9