Philips REM400 setup guide Programming The FC Keys See Page 9 For Further Instructions

QUICK FEATURES SETUP GUIDE (continued)

Device Re-Assignment (e.g., AUD Key Becomes Secondary VCR Key)

x 2

	x 2
Press SET	Enter 9-9-2;	Press component key	Press component key
until Red Light	the Red Light	to be moved once	to be reassigned once
blinks twice;	will blink twice.	(e.g.,VCR).	(e.g., AUD). Red Light will
release SET.			blink twice. Reassigned key is
			now ready for programming.
1	2	3	4

Programming The FC Keys (See Page 9 For Further Instructions)

x 2

	x 2
Press SET	Enter 9-9-5;
until Red Light	the Red Light
blinks twice;	will blink twice.
release SET.

* NOTE: If over 100 channels, enter 0-7-1.

or		x 2
Press FC1 or	Press component	Press SET
FC2 once.	key that controls	until Red Light
	channels once (e.g.,	blinks twice;
	CBL). Then enter	release SET.
	channel # (e.g. 7-1)*.

1	2	3	4	5
Programming The L1~L3 Keys (See Page 8 For Further Instructions)
x 2
	x 2
Press SET	Enter 9-7-5;	Press component		Press an L key once
until Red Light	the Red Light	key once		where new feature
blinks twice;	will blink twice.	(e.g., TV).		is to be learned;
release SET.				the Red Light will
				blink rapidly.
1	2	3		4
2"				x 2
Place remote controls		To learn functions		To lock in new feature,
2" apart; on original one,		onto other L keys (or		press SET until
press and hold key to be		if Red Light does not		Red Light blinks twice;
learned until Red Light on		blink twice in step 5),		then release SET.
DSS unit blinks twice.		repeat steps 1~5.

56 7

13