ABOUT OTHER FEATURES
Volume Lock
The DSS remote control is set at the factory to control the volume independently while in the TV,VCR, DSS,CBL,AUD, and CD modes.
To control the volume from one mode (e.g., TV) while in another mode (e.g.,CBL,DSS,or VCR*),perform the instructions below to lock the volume setting. This procedure will not affect separate control of your audio compo- nent’s volume in the AUD and CD modes*.
*NOTE: By pressing AUD or CD before enter- ing the sequence below, the DSS remote con- trol will operate your stereo and home theater volume controls in all modes.
Example – To Set Volume Lock To TV Mode:
1. 
On the remote control, press TV once.
2. 
Press and hold SET until the red light blinks twice, then release SET.
3. 
Press VOL+. The red light will 
blink twice.
Punch Through
The VCR Transport Keys (i.e., REW, PLAY, FFWD, REC, STOP, and PAUSE) are set at the factory to control the VCR,even if TV, CBL,or DSS is the selected mode. In other words, VCR control“punches through”regardless of what mode is on. Moreover, you do not have to press VCR before pressing the mode key.
However, if AUD or CD is the selected mode, the VCR Transport Keys will not control the VCR unless you press VCR first. In these two modes, the VCR Transport Keys will operate the functions for the selected component.
11
