Install the Philips Songbird software again (after the first installation)
Important!
The Philips Songbird software installer is preloaded to CAM.
To free memory capacity for your media content on CAM, the installer file is automatically deleted during the first installation process.
If you want to install the software any time after the first installation, follow these instructions:
1
2
3
4 Follow the
Battery level indication
The display indicates the approximate levels of | lish | ||||||
the battery status as follows: |
|
| Eng | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100% | 75% | 50% | 25% | 0% |
| ||
»» | A flashing battery screen indicates |
| |||||
|
|
| that the battery is low.The player |
| |||
|
|
| saves all settings and switches off |
| |||
|
|
| within 60 seconds. |
|
|
| |
Note
•• Rechargeable batteries have a limited number
of charge cycles. Battery life and number of charge cycles vary by use and settings.
•• The charging animation stops and the 
icon is displayed when the charging process is completed.
Tip
•• You can conserve battery power and increase the play time of CAM if you ensure that the shortest timer setting is selected. (To check/ adjust the timer settings, set the mode selector to 
and then select [Display Settings] > [Backlight timer].
Software loaded on the CAM
CAM comes with the following software:
•Philips Songbird (helps you update the firmware of CAM and transfer your media files).
Files loaded on the CAM
The following files are loaded on CAM:
•User Manual
•Frequently Asked Questions
•Safety and warranty information
•Worldwide warranty information
EN 9
