XP SBC RU 510/00.3
English
Instructions for use
Setting the remote control
This is only necessary if your TV does not respond to the RU510.
If that is the case, the RU510 does not recognize the brand and/or model of your TV and you need to program the remote control to do so.
The example belowinstructs you how to do this.
1Turn on the TV manually or use the original remote control. Tune in to channel 1.
2Look up the brand of your TV in the code list at the back of this
manual. One or more
3 | Keep keys ‘1’ and ‘3’ pressed simultaneously | ME | NU |
| K |
| for three seconds until the green LED |
|
| O | |
|
|
|
|
| |
| flashes twice and then remains lit | 1 |
| 2 | 3 |
|
| 4 |
| 5 | 6 |
|
| 7 |
| 8 | 9 |
|
| SHIFT | 0 |
| |
4Then enter the code noted in step 2 using the digital keys.
– The green LED will now flash twice.
If the LED flashes once for an extended period, the code has not been entered properly or the wrong code has been entered.
Start again from step 2.
5Point the RU510 at the TV and check that it responds as it should.
–If the TV responds to all of the key commands, the RU510 is ready for use. Do not forget to note your code.
•If the TV does not respond at all, or not to all of the
key commands, start again from step 2 and try the next code from the list.
6
