2Important Safety Instructions

aRead these instructions.

bKeep these instructions.

cHeed all warnings.

dFollow all instructions.

eDo not use this apparatus near water.

fDo not install near any heat sources such as radiators, heat registers, stoves

that produce heat.

gWhere the power plug is used as the disconnect device, the disconnect device shall remain readily operable.

hProtect the adapter cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

iOnly use attachments/accessories

jUse this apparatus only for its intended use as described in this manual.

kDo not overload wall outlets and extension cords as this can result in the

lNever push objects of any kind into this apparatus through casing slots as they may touch dangerous voltage points or short out parts that could result in a risk

mThe apparatus shall not be exposed to dripping or splashing and no objects

placed on the apparatus.

nDo not place any sources of danger on

o

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For assistance, visit our website www.philips.com/ AVENT or call 1-800-54-AVENT

pThis product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

Warning

To prevent strangulation with the power cord, always keep the baby unit and the power cord out of baby's reach, at least 1 meter/3.5 feet away. Do not use extension cords.

Caution: Risk of explosion, electric shock, short circuit, or leakage

The apparatus shall not be exposed to

with liquids, such as vases, shall not be placed on the apparatus.

Before you connect the baby monitor to the mains, make sure that the voltage indicated on the adapters of the baby monitor corresponds to the local mains voltage.

Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

Use the supplied adapter to connect the baby unit to the mains.

6EN

Page 5
Image 5
Philips SCD609, SCD610 user manual Important Safety Instructions, That produce heat