8EN
Compliance informationThe FCC ID number is located on the casing
bottom of the parent unit and in the battery
compartment of the baby unit.
$%*;
%*
<#
means that the equipment meets certain
radio communications and operational
requirements. This device complies with
Part 15 of the FCC Rules and RSS-210 of
Industry Canada. Operation is subject to the
following two conditions: (1) this device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause undesired
operation.
Radio interference
This equipment has been tested and found
to comply with the limits for a Class B digital
device,pursuant to Part 15 of the FCC Rules
and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment to an outlet on a
circuit different from that to which the receiver is
connected.
RF Radiation Exposure Statement
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 7 3/4
inches / 20 centimeters between the radiator
and your body. For handheld operation, this
equipment has been tested and meets the
FCC RF exposure guidelines. For body-worn
operation,this product has been tested and
meets the FCC RF exposure guideline when
used with the belt clip supplied with this
product. This transmitter must not be co-located
or operating in conjunction with any other
antenna or transmitter. Use of other accessories
may not ensure compliance with FCC RF
exposure guidelines. This equipment also complies
with Industry Canada RSS-102 with respect
to Canada’s Health Code 6 for Exposure of
Humans to RF Fields.
Do not attempt to repair or modify this
equipment
Any repairs or alterations made by the user
to the equipment may void the warranty
and compliance of the equipment. Changes
=
not expressly approved by Philips AVENT
may void the FCC authorization to operate
this equipment. For assistance visit our
website www.philips.com/AVENT or call
1-800-54-AVENT (1-800-542-8368).
Do not attempt to repair or modify this
equipment
Any repairs or alterations made by the user
to the equipment may void the warranty
and compliance of the equipment. Changes
=
not expressly approved by Philips AVENT
may void the FCC authorization to operate
this equipment. For assistance visit our
website www.philips.com/AVENT or call
1-800-54-AVENT (1-800-542-8368).
>?@G
This Philips AVENT appliance complies with all
>?@G#%
handled properly and according to the instructions
in this user manual, the appliance is safe to use
JJ#