English
HMeasuring cup
IBase with heating element
JIndicator LED
KCord storage brackets
LCap
MCover
NCover handle
OSteaming bowl
PBase with heating element
Preparing for use
1Place the Nutrition Centre on a dry, stable, level and horizontal surface out of the reach of children.
2Unwind the required length of mains cord from the cord storage brackets in the base.
3Insert the mains plug into the wall socket.
,The indicator LED starts to burn green.
The Nutrition Centre is now in standby mode.The appliance does not heat up until you press and turn the control knob to select a setting.
Using the appliance
Temperature overview
,Babies like their milk and food to be at a temperature of 37°C.The control knob enables you to set the correct food temperature.The setting depends on the amount, consistency and current temperature of the milk or food. (Fig. 2)
-y refrigerator temperature (approx. 10°C.)
-. room temperature (approx. 20°C.)
-m bottle contents up to 200ml
-, minimum bottle contents approx. 60ml
Note:If all the water has evaporated before the heating process is completed, the
Heating
Heating baby bottles
1Pour 20ml water into the water reservoir with the measuring cup. (Fig. 3)
2Remove the cap from the cover (1) and place the cover on the base (2). Place the bottle on the protective grid in the base (3). (Fig. 4)
3Look up the desired setting in the temperature overview.
The setting depends on the amount of milk in the bottle and the current bottle temperature.
4Press (1) and turn (2) the control knob to the desired setting. (Fig. 5)
,The indicator LED starts to burn red continuously and you hear a beep to indicate that the heating process has started.
,The heating process takes up to about 5 minutes, depending on the quantity and the temperature of the milk.
,When the milk has reached the right temperature, you hear three beeps.The indicator LED blinks red three times and then turns green.
5Take the bottle out of the appliance and unplug the appliance.
