Philips SCF280 manual Heating jars of baby food, Keeping bottles and jars warm, Sterilising

English

Note:Always test the milk on the back of your hand first to ensure it has a safe temperature for your baby.

Heating jars of baby food

1Pour 20ml water into the water reservoir with the measuring cup. (Fig. 3)

2Place the jar (max. content 150g) on the protective grid in the base. Place the cover on the base. (Fig. 6)

3Press (1) and turn (2) the control knob to n. (Fig. 5)

,The indicator LED starts to burn red continuously and you hear a beep to indicate that the heating process has started.

,The heating process takes about 5 minutes, depending on the quantity, type and temperature of the food.

,When the food has reached the right temperature, you hear three beeps.The indicator LED blinks red three times and then turns green.

4Remove the cover from the base, remove the jar and unplug the appliance.

Tip:To distribute the heat better, stir the contents of the jar after heating it.

Note:Always check if the contents of the jar are at the correct temperature by testing some of the food on the back of your hand.

Keeping bottles and jars warm

You can also use the 3-in-1 Nutrition Centre to keep bottles and jars warm for a short time. After the heating process is finished, simply leave the bottle or jar on the protective grid in the base and leave the cover on the base.The cover retains the heat and keeps the bottle or jar warm for some time. For microbiological and hygienic reasons, you must never keep baby food warm for more than one hour.

Sterilising

With the container, you can use the 3-in-1 Nutrition Centre to sterilise bottles and small objects like rubber teats and small toys.The Nutrition Centre disinfects the objects completely by destroying all harmful bacteria.

Note:This appliance does not sterilise according to clinical standards.

Note:Before you sterilise bottles and objects, clean them first.

1Pour 50ml water into the water reservoir with the measuring cup. (Fig. 3)

2Place the container on the base.

3Place the bottles upside down in the container. (Fig. 7)

The container can contain four wide-neck bottles or six regular-sized bottles.

4Snap the bottle necks onto the projections at the bottom of the container.

5Place small objects in the basket and place the basket in the container. Place the lid on the container. (Fig. 8)

6Press and turn the control knob to /. (Fig. 5)

,The indicator LED starts to burn red continuously and you hear a beep to indicate that the sterilising process has started.

,After about 15 minutes, you hear three beeps.The indicator LED blinks red three times and then turns green to indicate that the stelising process has finished.

7Remove the bottles and objects from the container and unplug the appliance.