SMSEN
SMS
Write a SMS
Inbox
Draft box
SMS Settings
SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services.
The factory settings on your SE735 correspond to the main national operator. If you wish to send or receive SMS messages through another service provider, you must set the corresponding numbers (see page 39).
You can create up to 10 SMS boxes (Box 0 to Box 9) and protect each box with a password (only for UK). Your SE735 can store up to 100 SMS messages (80 SMS in the Inbox and 20 SMS in the Draft box) shared by all the SMS boxes and the maximum length of each message is 160 characters.
In order to send and receive SMS messages, there must be at least one SMS Box. Box 9 with empty password is created by default (only for UK). For more information, please refer to "SMS Box (only for UK)" on page 38.
Write and send new SMS
1.Press mMENU, press mSELECT to enter SMS, press mSELECT again to Write a SMS.
2.Scroll :to the desired SMS Box (Box 0 to Box 9) and press mSELECT (only for UK).
Otherwise, you may press mSELECT to go the next screen if you do not need to enter a specific SMS Box.
3.Enter the PIN (if required) and press mOK.
Key | Operation |
|
|
u | Press to move cursor left by 1 position. |
| Press and hold to jump to the 1st character/digit. |
|
|
d | Press to move cursor right by 1 position. |
| Press and hold to jump to the last character/digit. |
>Press to erase the previous character/digit.
CLEAR
Press to return to the previous menu if there are no characters/digits on the input screen.
Long press to delete all characters/digits.
#Long press to switch between upper and lower case.
33
