ENGLISH 7
Important information
•Please install and connect the product in the order as described in this manual only. This assures best installation results with the least technical hassles.
•Please read this guide carefully before using the SL400i; and keep it for future reference.
•The most recent downloads and information on this product will be available through our website www.philips.com/streamium.
•Broadband Internet access (min. 256 kbps) is required if you want to use the Internet functions of the SL400i.
•Please check whether your Internet service provider charges extra fees for exceeding a certain limit of transferred data.
When using Internet media services on a daily basis, you may exceed such a limit. For example: When you listen to Internet radio (at 64 kbps) for about 36 hours,
1 GB (gigabyte) of data will be transferred to your streamium system. Watching Internet video at 700 kbps exceeds a 1 GB limit in 3 hours.
•During
(if appropriate) at hand.
Safety Precautions
•NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
•Before operating the system, check that the operating voltage indicated on the nameplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer.
•Radio equipment for wireless applications is not protected against disturbance from other radio services.
•The product should not be exposed to dripping or splashing.
No object filled with liquids, such as vases, should be placed on the product.
•Do not expose the system to excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.
•Allow a sufficient amount of free space all around the SL400i for adequate ventilation.
•Do not open this product. Contact your Philips retailer if you experience technical difficulties.
•Place the system on a flat, hard and stable surface. When the system is switched to standby mode, it is still consuming some power.To disconnect the system from the power supply completely, remove the AC power plug from the wall outlet.
•Make sure the air around the SL400i can circulate to prevent the SL400i from overheating internally. Also, avoid putting any heat sources (e.g. a power amplifier) underneath.
The SL400i has a thermal shutdown that shuts down the set when the internal temperature exceeds a certain threshold. If this happens, the set switches to standby with the
