Philips SL400i/37 manual Installing, 10ENGLISH

10ENGLISH

Installing

2.1 If you do not have a wireless computer network Option A

In this configuration you only have a computer and a TV.

•You will install the Wireless USB Adapter on your computer.

• You will connect the SL400i to the TV.

At the end, you will be able to send music, movies, and pictures from your computer to your TV or stereo.

... use to How

Installation CD

1Install the Wireless USB Adapter included in the box.

See the separate instructions and CD-ROM of the Wireless USB Adapter included in the box on how to install the adapter on your PC.

Note: Choose ‘Ad-Hoc’ as your network type during installation.

After the Wireless USB Adapter has been installed successfully, continue below.

2Make sure the Philips Media Manager you installed in chapter 1 is active. Double-click the Media Manager icon in the lower right corner of your monitor. Or click Start / Programs / Philips Media Manager.

Leave the Media Manager window open to be sure it is active.

3Put the batteries into the remote control.

See ‘Remote Control - Placing batteries’ on page 28 in the extended User Manual on CD-ROM if you need more information on how to do this.

4Connect the Audio + Composite video cable to the audio and video outputs % of the SL400i and to your TV.

Use the yellow connectors of the Audio + Composite Video cable to connect the CBVS

Video output of the SL400i to the Composite Video (CBVS) input of your TV. Note: set the P-SCAN switch $ (on the back of the SL400i) to OFF.

>This will enable you to view the user menus and multimedia content on the television screen.

Use the white and red connectors of the Audio + Composite Video cable to connect the Left/Right Audio output of the SL400i to the Audio inputs of your TV (white for left, red for right).

Option: connect the SL400i to an audio set using the second audio outputs ! or the digital audio output 0.

5Connect the mains cable between the AC mains input 9 of the SL400i and a mains socket.

>The indicator in the Power button lights up red when the SL400i is connected to the mains.