EN
WARNING!
When you reset the ADSL wireless base station using the blue reset button all configuration settings will be lost, also your ISP settings.
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity.
If the connection is inactive for longer than the maximum idle time,
it will perform system logout, and you have to log in again to access the management interface. (Default: 10 minutes)
Remote Management
By default, management access is only available to users on your local network. However, you can also manage the ADSL Wireless Base Station from a remote host by entering the IP address of a remote computer on this screen. Check the Enabled check box, and enter the IP address of the Host Address and click ‘SAVE SETTINGS’.
Note: If you check Enable and specify an IP address of 0.0.0.0, any remote host can manage the ADSL Wireless Base Station.
For remote management via WAN IP address you need to connect using port 8080. Simply enter WAN IP address followed by :8080, for example, 212.120.68.20:8080.
SNMP
Use the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP).
SNMP Community
A computer attached to the network, called a Network Management Station (NMS), can be used to access this information. Access rights to the agent are controlled by community strings. To communicate with the ADSL Wireless Base Station, the NMS must first submit a valid community string for authentication.
Parameter | Description |
Community | A community name authorized for |
| management access. |
Access | Management access is restricted to Read |
| Only (Read) or Read/Write (Write). |
Valid | Enables/disables the entry. |
Note: Up to five community names may be entered.
SNMM Trap
Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver.
29
