SPX Operation Manual | 12 |
Cleaning the Lens
Remove the Lens Tube from the SPX.
Using a 3mm Allen Key, undo the retaining screws on the back and front of the tube.
Open the top cover on the lens tube.
As the lens is multicoated, clean with a soft cloth or lens tissue only. To remove
The above are the only maintenance tasks which can be safely carried out by non approved personnel. Refer below - Safety & Maintenance note.
Safety
Philips Selecon has manufactured this luminaire in accordance with recognised best practices to recommended international safety standards. It is your responsibility to maintain this luminaire in good & safe working condition.
Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with cracked lens, damaged cable, etc. Consult your Philips Selecon distributor for assistance. Only replace damaged parts with authorised Philips Selecon spares.
N.B. Luminaire Cable - Your Philips Selecon luminaire is fitted with special heat resistant flexible cable, replace with genuine Philips Selecon spare part cable kit only - refer to your Philips Selecon distributor. (Replacement cables are supplied complete with necessary terminal connectors.)
Cable Conductor colour codes: |
|
Brown | - Phase, Live |
Blue | - Neutral |
As this luminaire is Double Insulated the Green/Yellow Earth wire may not be present and will have been cut back within the loom.
Version 1.1: 2010 © 2010 Philips Selecon All Rights Reserved
