Before you call for service…

Troubleshooting Tips

Problem

 

Possible Causes

What To Do

 

 

 

 

 

Self-Cleaning Models

 

 

 

 

 

 

 

 

Oven will not self-clean

 

The oven temperature is

Allow the range to cool to room temperature and reset the controls.

 

 

too high to set a self-clean

 

 

 

operation.

 

 

 

 

 

 

 

 

Oven controls improperly set.

See the Using the self-cleaning oven section.

 

 

 

 

 

 

 

The probe is plugged into

Remove the probe from the oven.

 

 

the outlet in the oven.

 

 

 

 

 

 

“Crackling” or

 

This is the sound of the metal

This is normal.

“popping” sound

 

heating and cooling during

 

 

 

both the cooking and cleaning

 

 

 

functions.

 

 

 

 

 

 

Excessive smoking

 

Excessive soil.

Touch the CLEAR/OFF pad. Open the windows to rid the room of

during a clean cycle

 

 

 

of smoke. Wait until the LOCKED DOOR light goes off. Wipe up the

 

 

 

 

excess soil and reset the clean cycle.

 

 

 

 

 

Oven door will not open

 

Oven too hot.

Allow the oven to cool below locking temperature.

after a clean cycle

 

 

 

 

 

 

 

 

 

Oven not clean after a

 

Oven controls improperly set.

See the Using the self-cleaning oven section.

clean cycle

 

 

 

 

Oven was heavily soiled.

Clean up heavy spillovers before starting the clean cycle. Heavily

 

 

 

 

 

 

soiled ovens may need to self-clean again or for a longer period

 

 

 

 

of time.

 

 

 

 

“LOCK DOOR” flashes

 

The self-clean cycle has been

Close the oven door.

in the display

 

selected but the door is not

 

 

 

closed.

 

 

 

 

 

LOCKED DOOR light

 

The oven door is locked

Touch the CLEAR/OFF pad. Allow the oven to cool.

is on when you want

 

because the temperature

 

to cook

 

inside the oven has not

 

 

 

dropped below the

 

 

 

locking temperature.

 

 

 

 

 

“F–and a number or

 

You have a function

Touch the CLEAR/OFF pad. Put the oven back into operation.

letter” flash in the

 

error code.

 

display

 

 

 

 

If the function code repeats.

Disconnect all power to the range for at least 30 seconds and then

 

 

 

 

 

 

reconnect power. If the function error code repeats, call for service.

 

 

 

 

Control signals after

 

You forgot to enter a bake

Touch the BAKE pad and desired temperature or the SELF CLEAN

entering cooking time

 

temperature or cleaning

pad and desired clean time.

or start time

 

time.

 

 

 

 

 

 

54

Page 54
Image 54
GE Coli Top See the Using the self-cleaning oven section, Crackling or, Popping sound, Excessive smoking, Clean cycle