Special features of your oven control. (on models with a START pad)
Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure.
12 Hour Shut-Off
With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the steps below.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the CLOCK pad or DELAY START pad (on some models) repeatedly until the display shows OFF or no shdn (no
Touch the START pad to activate the no
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections but you may change this to use the Celsius selections.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the BROIL HI/LO pad. The display will show F (Fahrenheit). On some models, you will need to touch the COOKING TIME and BROIL HI/LO pads at the same time.
Touch the BROIL HI/LO pad again. The display will show C (Celsius). On some models, you will need to touch the COOKING TIME and BROIL HI/LO pads at the same time.
Touch the START pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual 6 second beep may be canceled.
To cancel the 6 second beep:
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Depending on your model, you will need to touch either the KITCHEN TIMER ON/OFF pad or the BROIL HI/LO pad. The display shows CON BEEP (continual beep).
Touch the pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Touch the START pad.
20
