Philips TP3684C1 Connect the Video OUT, Also connect the Audio OUT, Right and Left jacks from

USING THE PIP (PICTURE-IN-PICTURE) FEATURE
PIP CONNECTION
icture in Picture (PIP) is the
Pshowing of two pictures on
the screen at the same time (one
main screen picture and a small-
er inset picture, or PIP).
Note: The PIP picture must be
supplied by a VCR (or other	MAIN SCREEN PICTURE	PIP INSET PICTURE
accessory device equipped with a
VIDEO OUTPUT jack).
The following is a basic PIP			BACK OF TV
hookup using a VCR to supply
the secondary picture.						1
BEGIN
Connect the VIDEO OUT			S-VIDEO
jack on the VCR to the VIDEO
IN (yellow) jack on the rear of			VIDEO
the TV.			L
Also connect the AUDIO OUT		ANT "A"	AUDIO
		75	R/MONO
(Right and Left) jacks from the
			IN-1	IN-2	OUT
VCR to the AUDIO IN jacks (red
and white) on the TV.
Also be sure that there is a nor-
mal Cable or Antenna signal con-						AUDIO OUT
nection between the VCR and the
		ANT OUT	VIDEO			FROM VCR
TV.				OUT		TO AUDIO IN
						ON TV
			(YELLOW)
This completes the basic PIP						(RED AND WHITE)
	OUTDOOR
hookup. Refer to pages 46-47 for
	UHF/VHF		OUT	OUT	OUT
“More PIP Connections.”	ANTENNA		ANTENNA	VIDEO	R AUDIO L
Move to the next page after			OR
			IN	IN	IN
the VCR to TV PIP connections
have been completed.		CABLE TV
		SIGNAL
SMART HELP
Remember, for other pos-					VCR
sible connections see pages
			(OR SIMILAR DEVICE)
46-47 for the “More PIP
Connections” section.

If you have a single (Monaural) Audio Output VCR, there are two methods of connection. Use only the Right Audio IN (RED) and leave the Left Audio IN with NO connection. Or, “Y” connectors are available to complete your connec- tion. Contact your dealer, or our Parts Information Center,

1-800-851-8885, for details.

42