USING THE REMOTE’S VCR BUTTONS
When using the TV remote with a VCR, first make cer-
tain it is set to control your VCR (using the Direct Access or Search method).
BEGIN
SLEEP
POWER
Set the TV/VCR/ACC mode switch to VCR on the remote.
Point the top of the remote
toward the front of the VCR (remote sensor window) when pressing the buttons.
VCR SYSTEM SWITCH
Set in the VCR position to send remote commands to the VCR.
PLAY BUTTON
Press to begin playback of a video tape.
REWIND BUTTON
Press to rewind tapes. For some VCRs, the STOP button may have to be pressed first, then REWIND. In playback mode, press or press and hold the button to view the picture moving rapid- ly in reverse.
STOP BUTTON
Press to stop the motion of a tape during playback, rewinding, fast forwarding, etc.
VCR RECORD BUTTON
Hold down the VCR/RECORD button and the PLAY button to begin a VCR recording.
SMART HELP
Remember, the VCR but- 
tons on the remote will not
operate your VCR if those features are not found on your VCR remote control.
Note: All VCR functions (particularly Search, Rewind, Fast Forward, etc.) will operate the same as with the orig- inal VCR remote control provided with the VCR.
TV | AV | ON/OFF | POSITION | FREEZE |
VCR | SWAP | SOURCE | PIP CH | |
|
|
| UP | DN |
ACC
SMARTSMART
SOUNDPICTURE
MENU 
SURF
VOL | CH |
MUTE
CC STATUS CLOCK A/CH
EXIT TV/VCR
VCR | MULTI |
RECORDMEDIA
INCREDIBLE
STEREO
POWER BUTTON
Press to turn the VCR ON and OFF.
NUMBER BUTTONS
Press buttons for direct VCR channel selections.
PAUSE BUTTON
Press to temporarily stop the tape during playback or recording. Press again to release Pause.
FAST FORWARD BUTTON
Press to rapidly advance the tape. For some VCRs, you may need to press the STOP button first, then the FAST FORWARD but- ton. During playback, press or press and hold the button to view the picture moving rapidly in the forward direction.
CHANNEL + & – BUTTONS
Press to scan up or down through the VCR channel numbers.
(CLOCK)TV/VCR BUTTON
Press to select VCR position (VCR indicator on the front of the unit will light), to view the playback of a tape, to watch a program while recording it, or to watch a TV broadcast using the VCR CH +, – or Numbered but- tons. Press again to place in the TV position (VCR indicator light will go off) or to view one pro- gram while recording another program.
41
