Press the Menu button on | Philips TS3659C1 instruction

ADJUSTING THE TREBLE, BASS, AND BALANCE SOUND CONTROLS

Besides the normal volume level control, your TV also has indi-

vidual sound adjustment controls. The TREBLE (high frequency), BASS (low frequency), and Speaker BALANCE may all be used to adjust the sound playback of TV programs.

BEGIN

Press the MENU button on the

remote to show the on-screen menu.

Press the CURSOR DOWN ■

button twice to select the SOUND menu.

Press the CURSOR RIGHT

.. REVIEW

.PICTURE

.SOUND

.FEATURESINSTALL

MOVIE RATING
– – – – – –
TV RATING
– – – – – –
BLOCK UNRATED	OFF
NO RATING	OFF

.

..REVIEWPICTURE

. SOUND TREBLE

.FEATURES BASS

INSTALL BALANCE AVL STEREO SAP

.

.SOUND.

. .

▶▶button and the menu will shift to the right to display an adjustment bar in front of the TRE- BLE control.

Use the CURSOR LEFT ◀◀ or RIGHT ▶▶ buttons to adjust the TREBLE (high frequency) level of the television’s sound.

After adjusting the TREBLE control, press the CURSOR DOWN ■ button to select another Sound adjustment: BASS or BAL-

ANCE. Use the CURSOR LEFT

◀◀or CURSOR RIGHT ▶▶ buttons to adjust the selected con- trol.

Press the STATUS/EXIT but-

ton to remove the menu from the screen.

SMART HELP

Remember, when the

bar scale is centered,

Speaker BALANCE is centered between the TV’s Left and Right side speakers.

6	SLEEP			POWER
6
TV	AV	STATUS/EXIT	CC	TV/VCR-CLOCK
VCR	VCR	INCREDIBLE	MULTI	A/CH
ACC	RECORD	STEREO	MEDIA
ACC
1	SMART			SMART	3	4 5
	SOUND			PICTURE	3
	MENU			SURF
5 4	VOL	MUTE		CH

2 5

. 28 TREBLE

. BASS

. BALANCE

. AVL

STEREO

SAP

.

.SOUND.

. .. TREBLE

. 28 BASS

. BALANCE

. AVL

STEREO

SAP

.

.SOUND.

	. .			TREBLE
	.			BASS
		.		0 BALANCE

		.
				AVL
	.			STEREO
				SAP

26

Image 26

Philips TS3659C1 manual Adjusting the TREBLE, BASS, and Balance Sound Controls, Press the Menu button on

Contents

TS3659C1 Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Cable/Antenna Adjusting the TV Picture Tings are at normal mid-range levels Press the Numbered buttons Setting the TV’S ClockTimer controls Press the STATUS/EXIT but Activating the TV’S on Timer Control Press the Menu button on Selecting the TV’S on Timer Channel Press the STATUS/EXIT button Setting the TV’S on Timer Start Time Turning on the on Timer Display Press the Cursor Down Understanding Smartlock Movie Ratings Down to highlight Using Smartlock Setting UP the Access CodeEnter current access code SmartLock control This stops the viewing of VCR, DVD, etc Using Smartlock Blocking ChannelsPress the Channel + or Select block Press the Cursor Right Button to access the movie ratings Using Smartlock Movie RatingEnter the correct access code number. Xxxx shows on Press the STATUS/EXIT but- ton to remove the menu Using Smartlock TV Rating Using Smartlock Blocking Options Left button to set Using Smartlock Block UnratedButton or the Cursor Block Unrated to on or Left button to set no Using Smartlock no RatingPress the Menu button on the remote to show the on-screen Rating to on or OFF Reviewing the Smartlock Settings Example Blocking is set to OFF Viewing Blocked Programming Xxxx Turning on the Noise Reduction Control Press the Cursor UP or Cursor Down buttons to Turning on the Contrast + Control Trast + control Press the Cursor Right Using the Closed Caption Control Mode Using the Sleep Timer Control Good BYE Sleep Adjusting the TREBLE, BASS, and Balance Sound Controls On a selected show and the TV is Setting the TV for Stereo and SAP ProgramsRemember, if stereo is not present Placed in the Stereo mode, the sound com Round Using the Incredible Stereo ControlUsing the Volume BAR Control Tial Use the Cursor Left or Right buttons to set Setting the Audio OUT ControlAudio OUT Press the Cursor Down button to select the Speakers Using the TV Speaker Control and Audio Output JacksConnect the Right and Left Use the Cursor Right or Cursor Left buttons Using the AUDIO/VIDEO Input Jacks Connect the Video yellow Turn the VCR or Digital Using the AUDIO/VIDEO Input Jacks CONT’DConnect the S-VIDEO Using the Smart Picture Control Using the Smartsound Control Press the Smart Sound but Using the Channel Surf Control Remote control number for your Find your Three-Digit Code on pages Direct Access Method Place the TV/VCR/ACC Setting the Remote Control to Operate Accessory DevicesTurn on the device by press- ing the Power button on Remote Control Direct Entry Codes Remote VCR Code no Remote Dvdcode no Using the REMOTE’S VCR Buttons TV Displays Wrong Channel or No Channels Above Tips if Something Isnt Working Glossary to Television Terms Index Philips Consumer Electronics Company Texas Page Limited Warranty