Initial installation
aOpenup the battery compartment of yourremote control
andplace the batteries in it as shown in the picture.
bClosethe battery compartment.
cConfirmthe picture on the TV screen with the OK button
onthe remote control.
dSelectthe language for the on-screen display (OSD) with
the Pror Pqbutton.
Thedisplay on the video recorder will only show English
text.
eConfirmwith the OK button.
’AutomaticTV channel search’ starts.This picture will
appearon the screen:
SEARCH 00
Waituntil all TV channels have been found. This can take
severalminutes.
fWhenall TV channels have been found, ’READY’ will
appearon the TV screen.
E’TIME’,’YEAR’, ’MONTH’, ’DATE’ will appear on the TV
screen.
TIME 20:00
YEAR 1999
MONTH 01
DATE 01
------------------------
-/+ 0-9 OK
gCheckif the TIME in line ’TIME’ is correct. If required,
changethe time with the number buttons 0-9 onyour
remotecontrol.
hConfirmwith the OK button.
iCheck’YEAR’, ’MONTH’ and ’DATE’. Confirm each line
withthe OK button.
jAfteryou have confirmed the line ’DATE, the video
recorderwill switch to standby.
Theinitial installation is now complete.
DIfyou have connected a decoder, you must install it
asdescribed in the next section.
DIfyou have connected a satellite receiver, please
readthe section ’satellite receiver’.
2. INSTALLING YOUR VIDEO RECORDER6