Reducing picture disturbance (’optimizingthe modulator’)
Youmay experience picture disturbance if you have not used
ascart cable to connect your video recorder and TV. This is
becauseanother TV station in your reception areamay
alreadybe using UHF-channel CH36 or 591MHz.
aMakesure that there is no cassette in the video recorder.
Withthe video recorder switched off hold the SYSTEM
buttonfor a few seconds until the modulator frequency,
forexample, ’G591’ (591 Mhz or channel 36) appears on
thevideo recorder display. The video recorder will then
transmita test picture channel orfrequency.
MODULATOR 591 G
------------------------
-/+ G/KgSELECT
ON/OFF gCL OK
bChangethe modulator frequency with the Pror
Pqbutton.
cConfirmthe new modulator frequency with the OK
button.
dTunein the TV set to this channel or frequency.
eToend, press the TV/STANDBYmbutton.
DIfthe picture or sound quality is poor, you may have
selectedthe wrong TV system.At step a, select
theTV system ’G591’ for PAL-B,G or ’K591’for
SECAM-D,K,using the SELECT button.Press the
SYSTEM buttonfor several seconds, until, for
example,’G591’ appears on the videorecorder
display.If you want to switch the modulator on
again,hold the CLEAR(CL), ybutton, until ’G591’
(Modulatorswitched on) appears on the display.
fToend, press the TV/STANDBYmbutton.
Switching off the modulator
Ifyou cannot clear picture or sound interference, you can
switchoff the built-in modulator.
Youshould only do this if you have connected the video
recorderto the TV set with a scart cable. ’Connecting VCR
withoutscart cable’ is not possible when the modulator is
switchedoff.
aSwitchon the TV set and select the programme number
forthe video recorder.
bMakesure that no cassette is in the video recorder.
Pressthe SYSTEM buttonfor several seconds, until, for
example,’G591’ appears on the videorecorder display.
cHoldthe CLEAR(CL), ybutton, until ’MOFF’ (modulator
off)appears on the video recorder display. If you want to
switchthe modulator on again, hold the CLEAR(CL), y
button,until ’G591’ (Modulator switched on) appears on
thedisplay.
dToend, press the TV/STANDBYmbutton.
21