Connecting without a scart cable
aSwitchoff the TV set.
bRemovethe aerial cable plug from your TV set and insert
itinto the 2socketat the back of the video recorder.
cPlugone end of the aerial cable provided into the 3
socketon the video recorder and the other end into the
aerialinput socket on your TV set.
dInsertone end of the mains cable into the mains socket
4atthe back of the video recorder and plug the other
endinto the wall socket.
eSwitchon your TV set and select the programme number
thatyou have chosen for video playback (see instruction
manualTV set).
fTunein the TV set in the UHF wave band untilthe
followingpicture appears.
DThevideo recorder will now send on channel
CH36/frequency591MHz:
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW
PHILIPS VIDEO RECORDER
TO CONTINUE PRESS OK
gThenread ’Initial installation’ in the chapter ’INSTALLING
YOURVIDEO RECORDER’.
Connecting a decoder or other equipment
Youcan connect additional equipment to the EXT.2 AV 2
socket.For example: a decoder, a satellite receiver or a
camerarecorder.
5