Automatic TV channel search
Thevideo recorder will search for all TV channels.
Ifyou want to start the automatic TV channel search again,
thenfollow the instructions below.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
cSelectthe line ’AUTOSEARCH’ with the Pror Pq
button.
dPressthe OK button. The ’Automatic TV channel search’
starts.
SEARCH 00
eWhenthe TV channel search is complete, ’READY’ will
appearon the screen.
Howto search for a TV channel manually, you can read in the
section’Manual TV channel search’.
Monitor function
Youcan switch backwards and forwards between TV picture
andvideo recorder picture with the MONITOR button. But this
onlyworks when you use a scart cable to connect the video
recorderto your TV set and if your TV set responds to this
switch-over.
Sorting and clearing TV channels manually
Youcan assign any programme number to a TV channel that
youhave stored and you can also delete unwanted TV
channels.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
cSelectthe line ’CHANNEL ALLOCATION’ with Pror
Pqbuttonand confirm with the OK button.
P01 CH26
------------------------
-/+ CL OK
dWiththe Pror Pqbutton, select the TV channel to
whichyou want to give a programme number (starting
with’P01’).
eConfirmwith the OK button.
DIfyou want to delete a TV channel, press the
CLEAR(CL), ybutton.
fRepeatsteps dto euntil you have given a programme
numberto all TV channels.
gToend, press the TV/STANDBYmbutton.
9