Channel number or frequency display

Youcan switch between the display for ’channel number’ or
’frequency’for manual channel search.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
cSelectthe line ’CHANNEL/FREQUENCY’ with the
Pror Pqbuttonand confirm with the OK button.
dWiththe Pqbutton, select ’CHANNEL’or
’FREQUENCY’and confirm with the OK button.
eToend, press the TV/STANDBYmbutton.

Satellite receiver

Youcan receive channels from the satellite receiver via the
scartsocket EXT.2 AV 2 .
Todo this, select the channel number ’E2’ by pressing the
buttons Pqor Pr.You will have to select the channels to
bereceived by the satellite receiver on the receiveritself.

Special installation functions

Youcan select one of the following installation functions in
orderto adapt the video recorder to your own specific
requirements.

Automatic TV channel allocation (Follow

TV)

Withthis function, the video recorder stores the channels in
thesame order as on the TV set. This only works if the video
recorder(socket EXT.1 AV 1 )and the TV set are connected
witha scart cable. You must switch off any equipment
connectedto socket EXT.2 AV 2 .
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU buttonon the remote control. The main
menuwill appear.
CLOCK
OSD
CHANNEL ALLOCATION
CHANNEL/FREQUENCY
MANUAL SEARCH
AUTOSEARCH
LANGUAGE
FOLLOW TV
DIRECT RECORD
COUNTER
------------------------
-/+ OK
cSelectthe line ’FOLLOW TV’ with the Pror Pq
button.
dPressthe OK button. ’TV01’ will appear on the video
recorderdisplay.
TV01
eSelectprogramme number ’1’ on the TV set.
fConfirmwith the OK button on the video
recorder-remotecontrol. The video recorder compares
theTV channels on the TV set and the video recorder.
Ifthe video recorder found the same TV channel as the
TVset, then it stores it at ’P01’.
DWhen’NOTV’ (no signal from TV set) appears in the
display,the TV channels can not be allocated
automatically.In this case, read ’Manual TV channel
allocation’.
gWaituntil, for example, ’TV02’ appears.
hSelectthe next programme number, for example, ’2’ on
theTV set.
iConfirmwith the OK button on the video
recorder-remotecontrol.
DIfyou allocated the wrong TV channeL, you can go
backone step with the D/Sr button.
jRepeatsteps gto iuntil all TV channels have been
allocated.
kToend, press the TV/STANDBYmbutton.
8