How to check or alter a TIMER
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe TIMERsbutton on the remote control.
Theprogramming mode selected last is marked.
cSelectthe line ’TIMER LIST’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe TIMER you want to check or alter with the
menubuttons P=or P;.
ePressthe menu button P.
fSelectwhat you want to check or alter data with the
menubuttons Qor P.
gAlterdata with the menu buttons P=or P;or with
thedigit buttons 0-9 .
hConfirmwith the OK button.
iToend, press the TIMERsbutton.
jPleasenote that you inserted a cassettewithout erase
protection.Switch off with the STANDBYmbutton.
Theprogrammed recording will only function when the
videorecorder is switched off with the STANDBYmbut-
ton.
How to clear a TIMER
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe TIMERsbutton on the remote control.
Theprogramming mode selected last is marked.
cSelectthe line ’TIMER LIST’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe TIMER you want to clear with the menu
buttons P=or P;.
ePressthe CLEAR(CL) button.
fConfirmwith the OK button.
gSwitchoff with the TIMERsbutton.
’NexTView Link’
Thisvideo recorder is equipped with the function ’NexTView
Link’.If your television is also equiped with this function, you
canmark TV programmes on the television for programming.
TheseTV programmes will automaticallybe transmitted to a
TIMERblock on the video recorder. If you clear the marking of
theTV programme on the television, the corresponding TIMER
blockon the video recorder will also be cleared.
Formore information, read the instruction manual of your TV
set.
14