Philips VR800/07 Starting synchro-edit, Variant 1, the video recorder is to control the camera recorder, Variant 2, the camera recorder is to control the video recorder, Setting the preroll time

fSwitchthe camera recorder to ’still picture’ (playback-
pause).
gConfirmwith the menu button P.The video recorder
nowcontrols the connected camera recorder type.
hThefollowing message appears on the TV screen:
’VCRCONTROL DETECTED’ when the video recorder
controlsthe camera recorder or ’CAMERA CONTROL
DETECTED’when the camera recorder controls the video
recorder.
Starting synchro-edit
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’RECORD FUNCTIONS’ with the menu
buttons P=or P;andconfirm with the Pbutton.
dSelectthe line ’SYNCHRO EDIT’ with the menu buttons
P=or P;andconfirm with the Pbutton.
eTheOSD corresponding to the connected camera re-
cordertype appears on the TV screen.
fSearchthe beginning of the recording on the video
recorder.
gPressthe STILL Rbutton. ’STILL’ appears on the TV
screen.
hUsethe SELECT button to selectthe OSD for the camera
recorder.
iSearchthe beginning of the recording on the camera
recorder.
Switchthe camera recorder to ’still picture�� (playback-
Pause).
Theway copying is started depends on the camera recorder
typeused:
Variant1 when the video recorder controls the camera
recorder,or
Variant2 when the camera recorder controls the video
recorder.
Variant 1, the video recorder is to control
the camera recorder
aStartcopying with the RECORD/OTRnbutton on the video
recorder.
Thecamera recorder starts ’PLAYBACK’ and at the same
timethe video recorder starts ’RECORDING’.
bStopcopying with the STOP hbutton on the video re-
corder.
cEndcopying with the MENU button.
Variant 2, the camera recorder is to control
the video recorder
aStartcopying with the corresponding button on the
camerarecorder.
Thecamera recorder starts ’PLAYBACK’ and at the same
timethe video recorder starts ’RECORDING’.
bStopcopying with the PAUSE or STILL button on the
camerarecorder.
cEndcopying with the MENU button.
Setting the ’preroll time’
Whenthe beginning of the recording is missing, the ’preroll
time’was too long. Select a shorter ’preroll time’.
Ifrecording started too early, the ’preroll time’ was too short.
Selecta longer ’preroll time’. You can select a ’preroll time’
between1:00 and 5:00 seconds.
aPressthe MENU button.
bSelectthe line ’RECORD FUNCTIONS’ with the menu
buttons P=or P;andconfirm with the menu button
P.
cSelectthe line ’RECORD SETTINGS’ with the menu
buttons P=or P;andconfirm with the menu button
P.
dInline ’PREROLL TIME’, adjust the ’preroll time’ with the
menubuttons Por Q.
DYoucan also directly enter the ’preroll time’ with the digit
buttons 0-9 .
DWiththe CLEAR(CL) buttonyou can reset the ’preroll time’
tothat of the identified camera recorder type.
eConfirmwith the OK buton.
fToend, press the MENU button.
20