Automatic search for tape position(Index search)
Atthe beginning of each recording, the video recorder marks
thetape with a index code mark.
aPressthe INDEXEbutton. Then press the Ibutton to
selectthe next code mark or the Hbutton for the pre-
viouscode mark.
bWhenthe video recorder finds the code mark or a blank
spaceit will automatically switch to playback.
DYoucan only search for a blank space with recordings
madeon a video recorder that does not havethis index
codemark function.
Eliminating picture interference
Whenthe picture quality is poor, please proceed as follows:
Tracking during playback
aDuringplayback, press the MENU button.
bSelectthe line ’PLAY FUNCTIONS’ with the menu buttons
P=or P;andconfirm with the Pbutton.
cSelectthe line ’MANUAL TRACKING’ with the menu
buttons P=or P;.
dHoldthe menu buttons Qor Puntilthe playback
qualityis at its best.
eConfirmwith the OK button.
fToend, press the MENU button.This setting will remain
untilyou remove the cassette.
Tracking during still picture
Ifthe still picture vibrates vertically, you can improve the still
pictureas follows:
aDuringstill picture, press the MENU button.
bSelectthe line ’PLAY FUNCTIONS’ with the menu buttons
P=or P;andconfirm with the Pbutton.
cSelectthe line ’VERTICAL STABILITY’ with the menu
buttons P=or P;.
dHoldthe menu buttons Qor Puntilthe picture qual-
ityis at its best.
eConfirmwith the OK button.
fToend, press the MENU button.
Cleaning the video heads
aDuringplayback, press the MENU button.
bSelectthe line ’PLAY FUNCTIONS’ with the menu buttons
P=or P;andconfirm with the Pbutton.
cSelectthe line ’HEAD CLEANING’ with the menu buttons
P=or P;.
dPressthe OK button. ’HEAD CLEANING IN PROGRESS’
appearson the screen.
eWaita few seconds, until the message disappears and
thenpress the MENU button.
9