Important for the United Kingdom

Thisapparatus is fitted with an approved moulded 13 Amp
plug.To change a fuse in this type of plug proceed as follows:
aRemovefuse cover and fuse.
bFixnew fuse which should be a BS1362 3A, A.S.T.A. or
BSIapproved type.
cRefitthe fuse cover.
Ifthe fitted plug is not suitable for your socketoutlets, it should
becut off and an appropriate plug fitted in its place.
Ifthe mains plug contains a fuse, this should have a valueof
3A.If a plug without a fuse is used, the fuse at the distribution
boardshould not be greater than 5A.
DNote:* The severed plug must be destroyed to avoid a
possibleshock hazard should it be inserted into a 13A
socketelsewhere.
Howto connect a plug:
Thewires in the mains lead are coloured in accordance with
thefollowing code:
BLUE- ’NEUTRAL’ (’N’)
BROWN- ’LIVE’ (’L’)
dTheBLUE wire must be connected to the terminal which
ismarked with the letter ’N’ or coloured BLACK.
eTheBROWN wire must be connected to the terminal
whichis marked with the letter ’L’ or coloured RED.
fDonot connect either wires to the earth terminal in the
plugwhich is marked with the letter ’E’ or by the safety
earthsymbol \or coloured green or green-and-yellow.
Beforereplacing the plug cover, make certain that the cord
gripis clamped over the sheath of the lead - not simply over
thetwo wires.

Connecting to the TV-set

Whenyou install your Video recorder for the first time, please
read:
Etheparagraph ’Connecting with scart cable and Easy
Link/NexTView’,when your TV-set is equipped with ’Easy
Link/NexTView’.
Etheparagraph ’Connecting with scart cable without Easy
Link/NexTView’,when your TV-set is not equipped with
’EasyLink/NexTView’.
Etheparagraph ’Connecting without a scart cable’, when
youdo not use a scart cable.

Connecting with scart cable and

’Easy link/NexTView’

Withthe function ’EasyLink/NexTView’, your video recorder
canexchange information with thetelevision. Heed the
operatinginstruction of your television.
With’Easy Link/NexTView’ the TV channels from the TV will
automaticallybe loaded.
aRemovethe aerial cable plug from your TV set and insert
itinto the 2socketat the back of the video recorder.
bPlugone end of the aerial cable provided into the TV
socketon the video recorder and the other end into the
aerialinput socket on your TV set.
cPlugone end of the special scart cable provided into the
AV1EXT1 scart socket at the back of the video recorder
andthe other end into the scart socket on your TV set.
dSwitchon the TV set.
eInsertone end of the mains cable into the mains socket
4atthe back of the video recorder and the other end
intothe wall socket.
fThevideo recorder will automaticallyload all TV chan-
nelsstored on your TV, in the same sequence.
Thismay take several minutes.
Whenall data (TV channels, language, country) has been
copied,the following text appears on the TV screen:
’EASYLINK LOADING COMPLETE’.
gCheckif clock and date are correct. Read the paragraph
’SettingTime/Date’ in this chapter.
1. INSTALLATION
2