Autoinstall
Thevideo recorder will search for all TV channels. It stores TV
channelsfound in the following sequence: BBC 1, BBC 2, ITV,
CH4, CH 5, SKY, others.
Initial Installation
aIfthe aerial (antenna) has been connected to the video
recorder,press the OK button.Please continue with the
nextparagraph at step e.
Successive Installation
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’AUTOINSTALL’ with the menu buttons
P=or P;andconfirm with the Pbutton.
e’AUTOINSTALL’starts. This can take severalminutes.
INSTALLATION
AUTOINSTALL
SEARCHINGFOR TV CHANNELS
03 CHANNELSFOUND
________________________
fWhen’AUTOINSTALL’ is complete, ’AUTOINSTALL
COMPLETE’will appear on the TV screen.
gToend, press the MENU button.
Automatic TV Channel Allocation(FOLLOW TV)
Withthis function the video recorder maintains the same
channelsequence as on the TV set, in case you connected
yourvideorecorder to a TV set without scart cable. This only
functionsif the video recorder (socket AV1EXT1 ) and the TV
setare connected with a scart cable. Additional equipment
connectedto socket AV2EXT2 must be switched off.
DWith’Connecting with scart cable and ’Easy Link/NexT-
View’,this function will start the data transfer.
aSwitchon the TV set. If required, select the programme
numberfor the video recorder.
bPressthe MENU button.The main menu appears.
cSelectthe line ’INSTALLATION’ with the menu buttons
P=or P;andconfirm with the Pbutton.
dSelectthe line ’FOLLOW TV’ with the menu buttons
P=or P;andconfirm with the Pbutton.Take no-
ticeof the message on the TV screen.
ePressthe OK button.
Ifthe video recorder recognizes that the TV set has been
connectedwith a scart cable, ’TV’ 01’ appears in the
display.
EWhen’NOTV’ (no signal from TV set) appears in the
display,the TV channels can not be allocated automati-
cally.In this case, read paragraph: ’Manual TV Channel
NumberAllocation’.
fSelectprogramme number ’1’ on the TV set.
gConfirmwith the OK buttonon the video recorder-re-
motecontrol. The video recorder compares the TV
channelson the TV set and the video recorder.
Ifthe video recorder found the same TV channel as the
TVset, then it stores it at ’P01’.
hWaituntil e.g.: ’TV’ 02’ appears.
iSelectthe next programme number, e.g.: ’2’ on the TV set.
jConfirmwith the OK buttonon the video recorder-re-
motecontrol.
DIfyou allocated the wrong TV channeL, you can go back
onestep with the menu button Q.
4