DWhilea programmed recording is being made, you
cannotoperate your video recorder manually. If you
wantto cancel the programmed recording, press the
STANDBYmbutton.
DIfthe video recorder is switched on a few minutes
beforea programmed recording is supposed to
begin,’SWITCH TO STANDBY - TIMER
RECORDING’will flash on the TV screen.
DIfyou reach the end of the cassette during a
recording,the video recorder will automatically
ejectthe cassette.
DIfyou forget to load acassette, ’NO CASSETTE’
willappear on the TV screen and ’k’ will flash on the
videorecorder display.
DIfyou have put in a cassette which cannot be used
forrecording, the video recorder will automatically
ejectit.
DIf`TIMER FULL´ appears on the TV screen when
youpress the TIMERkbutton, you have used up all
theavailable TIMER blocks. If you want to clear or
checka programmed recording (TIMER block),
pressthe Cbutton and select the TIMERR block
withthe PROG.qor PROG. rbutton.
DProgrammenumbers ’E1’ and ’E2’ are for
recordingsfrom other sources (through scart socket
EXT.1AV 1 or EXT.2 AV 2 ).
How to check or change a programmedrecording (TIMER)
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe TIMERkbutton on the remote control.
Theprogramming mode selected last is marked.
cSelectthe line ’TIMER LIST’ with the Bor A
buttonand confirm with the Cbutton.
dSelectthe programmed recording (TIMER) you want to
checkor change with the PROG.qor PROG. rbutton.
ePressthe Cbutton.
fSelectthe entry field with the Dor Cbutton.
gChangeany information with the PROG.ror PROG. q
buttonor with the 0-9 buttons.
DUnder’END’, use the SELECT buttonto select the
recordingspeed ’SP’ or ’LP’.
hConfirmwith the OK button.
iToend, press the TIMERkbutton.
jMakesure that the cassette you have put in can be
recordedon. Switch off with the STANDBYmbutton.
DTheprogrammed recording will only function when
thevideo recorder is switched off with the
STANDBYmbutton.
How to clear a programmed recording(TIMER)
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe TIMERkbutton on the remote control.
Theprogramming mode selected last is marked.
cSelectthe line ’TIMER LIST’ with the Bor A
buttonand confirm with the Cbutton.
dSelectthe programmed recording (TIMER) you want to
clearwith the Bor Abutton.
ePressthe CLEAR(CL) button.
fConfirmwith the OK button.
gSwitchoff with the TIMERkbutton.
’NexTView Link’
Thisvideo recorder is equipped with the function ’NexTView
Link’.If your television is also equiped with this function, you
canmark TV programmes on the television for programming.
TheseTV programmes will automaticallybe transmitted to a
TIMERblock on the video recorder. If you clear the marking of
theTV programme on the television, the corresponding TIMER
blockon the video recorder will also be cleared.
Formore information, read the instruction manual of your TV
set.
26