iSwitchoff with the STANDBYmbutton.
Theprogrammed recording will only function when the
videorecorder is switched off with the STANDBYm
button.
DIfany of the TIMER blocks are in use, ’k’ will light up
onthe video recorder display.
DWhilea programmed recording is being made, you
cannotoperate your video recorder manually. If you
wantto cancel the programmed recording, press the
STANDBYmbutton.
DIfthe video recorder is switched on a few minutes
beforea programmed recording is supposed to
begin,’SWITCH TO STANDBY - TIMER
RECORDING’will flash on the TV screen.
DIfyou reach the end of the cassette during a
recording,the video recorder will automatically
ejectthe cassette.
DIfyou forget to load acassette, ’NO CASSETTE’
willappear on the TV screen and ’k’ will flash on the
videorecorder display.
DIfyou have put in a cassette which cannot be used
forrecording, the video recorder will automatically
ejectit.
DIf`TIMER FULL´ appears on the TV screen when
youpress the TIMERkbutton, you have used up all
theavailable TIMER blocks. If you want to clear or
checka programmed recording (TIMER block),
pressthe Pbuttonand select the TIMERR block
withthe ;Por P=button.
DProgrammenumbers ’E1’ and ’E2’ are for
recordingsfrom other sources (through scart socket
EXT.1AV 1 or EXT.2 AV 2 ).
How to check or change a programmedrecording (TIMER)
aSwitchon the TV set and select the programme number
forthe video recorder.
bPressthe TIMERkbutton on the remote control.
Theprogramming mode selected last is marked.
cSelectthe line ’TIMER LIST’ with the P=or ;P
buttonand confirm with the Pbutton.
dSelectthe programmed recording (TIMER) you want to
checkor change with the ;Por P=button.
ePressthe Pbutton.
fSelectthe entry field with the Qor Pbutton.
gChangeany information with the P=or ;Pbutton or
withthe 0-9 buttons.
DUnder’END’, use the SELECT button to select the
recordingspeed ’SP’ or ’LP’.
hConfirmwith the OK button.
iToend, press the TIMERkbutton.
jMakesure that the cassette you have put in can be
recordedon. Switch off with the STANDBYmbutton.
DTheprogrammed recording will only function when
thevideo recorder is switched off with the
STANDBYmbutton.
25